Tips on Using Pool Clarifiers

2:28 am 17 March 2020

Read and follow label instructions exactly, in regards to pool water balance requirements, correct dosage, application method and pool filtration following treatment.
Overdosing the pool with polymer clarifiers can change the charge of the suspended particles from negative (-) to positive (+), resulting in increased water turbidity.
If pool clarity problems began with an algae bloom, be sure to kill algae before clarifier treatment. This requires 10-30 ppm of chlorine, with a suitably low pH of around 7.2.
Operate the filter 24 hours per day during treatment, or as long as possible each day and night to improve circulation and filtration.
Resist the urge to over-clean the filter. Backwash or clean the filter only when the pressure gauge has risen 7-9 lbs.
Maintain proper water balance and chlorine levels following treatment. Some clarifiers may increase pool pH levels.

See our entire line of swimming pool clarifiers, 20 products to improve pool water clarity problems by coagulation of suspended particles!

Leave a Reply below if you are having trouble with your pool water clarity – I answer them personally!

bestpoolcleaner